|
This is a bunch of pictures with descriptions on how to upgrad your JBMM's
hard drive. This information provided by: alaysias <alaysias@yahoo.com>.
(thankyou alaysais!)
- 01.jpg - The IBM Travelstar 40GB HD
- 02.jpg - The Torx Tool You'll Need
- 03.jpg - The Bending Process
- 04.jpg - The JBMM's HD Connector
- 05.jpg - The Processers on the JBMM Circuit
Board
- 06.jpg - Archos Glued the Rubber Pads...
- 07.jpg - The Four Rubber Pads...
- 08.jpg - The JBMM Main Board is Screwed to
the front plastic
- 09.jpg - The TI Chip on the Main Board
- 10.jpg - The Main Board from the top - See
the LCD...
- 11.jpg - Another Picture of the MainBoard
- 12.jpg - Adjusting the Black Light
- 13.jpg - The Main Board is soldered to the
back metal plate.
- 14.jpg - Don't forget to transfer the non-conductive
plastic on the old HD.
- 15.jpg - And the plastic on the Back, too...
- 16.jpg - Taking off the back plasic...
- 17.jpg - The back plastic
- 18.jpg - Puting the plastic on the new HD.
- 19.jpg - Puting the front plastic on the new
HD.
- 20.jpg - The JBMM's Front Plastic Plate
- 21.jpg - The back of theFront Plastic Plate
- 22.jpg - Puting the Front Plastic Plate back
on.
- 23.jpg - Installing the new HD.
- 24.jpg - You now have almost 40gb!
|
